4BY3-150 Marine
Yanmar 4BY3-150 · 4BY3 family: specifications, its industrial/tractor base engine, cross-referenced parts and where to buy them.
The 4BY3 is believed to use the BMW B47D20 2.0 L inline-4 common-rail diesel — the direct successor to the N47 (same 84 mm bore × 90 mm stroke, 1 995 cc), introduced in 2014, matching the 4BY3 launch year. Some internal wear parts may cross to BMW B47 numbers; verify dimensions against the BMW service schedule before ordering. Marine-specific externals are Yanmar-only.
The Yanmar 4BY3-150 is likely a marinized BMW B47D20 2.0 L common-rail diesel (N47 successor; same 84×90 mm / 1995 cc, 2014 launch match). Some internals may cross to BMW B47 — verify before ordering. Marinized externals are Yanmar-only. No BMW donor BOM loaded yet. source
common-rail turbo+IC (Yanmar datasheet)
A ✓ means at least one cheaper channel — aftermarket, the tractor/industrial base engine, or a standard component — exists for this engine in that category.
Parts by section · 53 assemblies
The exploded parts diagrams for the 4BY3-150, grouped by system. Open a figure for its callout part numbers and per-variant quantities.
Belts & pulleys
Bilge & accessory pumps
Camshaft & timing gears
Cooling – fresh water
Cooling – sea water
Crankshaft & flywheel
Cylinder block
Cylinder head & valves
Electrical & instruments
Fuel injectors & nozzles
Fuel lines, tank & filter
Intake and Exhaust
Lubricating
Mounting
Other / general
Pistons, rods & liners
Tools & labels
Transmission & drive
External links — we host none of these documents.
4BY3-150 — Affiliate Parts Search
As an Amazon Associate I earn from qualifying purchases. Other links (eBay, AliExpress) are also affiliate links — they help pay for the site, at no extra cost to you. More
- Category
- Marine
- Engine family
- 4BY3
- Year range (approx)
- from 2014
- Cylinders
- 4
- Rated output
- 150 hp (110.3 kW)
- Bore × stroke
- 84 × 90 mm
- Displacement
- 1995 cc
- Max rpm
- 4000
- Continuous rpm
- 3876
- Aspiration
- Turbocharged + intercooled