Home › Part 24101-062034
24101-062034 Marine + Industrial
BALL BEARING
24101-062034 — Affiliate Parts Search
As an Amazon Associate I earn from qualifying purchases. Other links (eBay, AliExpress) are also affiliate links — they help pay for the site, at no extra cost to you. More
Fitted to
Engines, drives and generators whose parts catalogue lists this part. Open any for its exploded parts list.
Engines Saildrives & gearboxesOEM interchange
Other OEM part numbers for the same part — order from any of these makers or their dealers.
Aftermarket equivalents cross-ref
Third-party equivalents (Jabsco, Sierra, WIX, Mann…) — not OEM; verify before ordering. Usually cheaper than the marine dealer.
| Equivalent P/N | Brand | Description | Source | Confidence |
|---|---|---|---|---|
| 0.3431.483 | Johnson | Johnson 0.3431.483 / 05-08-129 = 6203 = VP 11010 on F5B-9 858150 and F7B-9 3583115. Later Johnson 0.3431.742 is 6203-2RSH replacing 0.3431.483. · depth:bearings | depcopump.com | confirmed |
| 6203 | SKF | volvo-penta Johnson F5B-9 10-24268-4 = VP 858150/858408; pos 15 0.3431.483 BALL BEARING 6203 qty2; retain ring bore D40. Sibling F7B-9 10-24524-12 (VP 3583115 31/41) same 0.3431.483/6203. PPS 3583115 exploded lists Ball bearing 11010. Not 6001 (F4 181717). Drawing prints 6203 not 2RS (Johnson 0.3431.742 6203-2RSH is a later service sub). Do not lump 861812. · depth:bearings | buyfilteronline.com; depcopump.com; kubotageneratorsdirect.com; shop.toadmarinesupply.com | confirmed |
Standard component cross-ref
An industry-standard component — buy from any bearing / seal / o-ring house; just specify the designation.
| Equivalent P/N | Brand | Description | Source | Confidence |
|---|---|---|---|---|
| 6203 | Bearing | Any-house deep-groove 6203 (17x40x12) = VP 11010; Johnson F5B-9/F7B-9 qty2 on 858150/858408/3583115. Same hardware PN also on D1/D2 cylinder-block figures. · depth:bearings | depcopump.com; kubotageneratorsdirect.com; shop.toadmarinesupply.com; soleiberia.com | confirmed |
Used in 7 places
Every catalog figure this part is placed in, the model(s) it applies to, and its reference/level/quantity.
| Model(s) | Catalog | Figure | Page | Ref | Lev | Qty |
|---|---|---|---|---|---|---|
| KM35A | KM35 Parts Catalog | Fig 2. INPUT SHAFT & SUPPORT SHAFT | 10 | 7 | 1 | 1 |
| KM35A2 | KM35 Parts Catalog | Fig 17. INPUT SHAFT & SUPPORT SHAFT | 25 | 7 | 1 | 1 |
| 3TN66-UMF | 3TN66-UMF Parts Catalog | Fig 7. CAMSHAFT & DRIVING GEAR | 8 | 24 | 1 | 1 |
| 3TN66L-UT | 3TN66L-UT Parts Catalog | Fig 8. CAMSHAFT & IDLE GEAR | 12 | 11 | 1 | 1 |
| 3TNE68-UMF | 3TNE68-UMF Parts Catalog | Fig 7. CAMSHAFT & DRIVING GEAR | 8 | 24 | 1 | 1 |
| 3QM | 3QM30 Parts Catalog | Fig 9. C.S.W.PUMP & BILGE PUMP | 18 | 12 | 2 | 2 |
| 3QM | 3QM30 Parts Catalog | Fig 10. C.S.W.PUMP & BILGE PUMP | 20 | 12 | 2 | 2 |